| ROB103 | ROBART
MAIN LANDING GEAR [LARGE]
These detailed plastic strut covers fit over standard music wire struts to give a more realistic apperance. They feature snap together construction for easy assembly, and they can be cut to size. For 1/8", 5/32" & 3/16" wire struts. These are also adaptable to retractable landing gear. Pictures Shown Covers Assembled (assembly is required) |
$9.95 |
| ROB104 | ROBART
TRI LANDING GEAR [LARGE]
|
$10.00 |
| ROB105 | ROBART
MAIN LANDING GEAR [SMALL]
|
$7.75 |
| ROB106 | ROBART
TRI LANDING GEAR [SMALL]
|
$9.95 |
| ROB107 | ROBART
40 SCALE GEAR STRUT
|
$10.95 |
| ROB108 | ROBART
60 SCALE GEAR STRUT
|
$10.95 |
| ROB109L | ROBART
LARGE TRI GEAR SET
|
$12.95 |
| ROB109S | ROBART
SMALL TRI GEAR SET
|
$12.95 |
| ROB110 |
ROBART 2 INCH UNIV SCALE WHEEL   
|
$9.65 |
| ROB111 |
ROBART 2-1/4 INCH UNIV SCALE WHEEL |
$11.15 |
| ROB112 | ROBART 2-1/2 INCH UNIV SCALE WHEEL | $11.35 |
| ROB113 | ROBART 2-3/4 INCH UNIV SCALE WHEEL | $11.65 |
| ROB114 | ROBART 3 INCH UNIV SCALE WHEEL | $12.25 |
| ROB115 | ROBART 3-1/4 INCH UNIV SCALE WHEEL | $12.85 |
| ROB116 | ROBART 3-1/2 INCH UNIV SCALE WHEEL | $13.45 |
| ROB117 | ROBART 3-3/4 INCH UNIV SCALE WHEEL | $14.95 |
| ROB118 | ROBART 4 INCH UNIV SCALE WHEEL | $16.75 |
| ROB121 |
ROBART SCALE RETRACTABLE TAILWHEEL
|
$24.95 |
| ROB122 |
ROBART MINI SCALE RETRACTABLE TAILWHEEL
|
$16.95 |
| ROB129 |
ROBART 2 INCH DIAMOND TREAD WHEEL
|
$10.65 |
| ROB130 | ROBART 2-1/4 INCH DIAMOND TRD WHEEL | $11.15 |
| ROB131 | ROBART 2-1/2INCH SCALE DIAMOND TREAD WHEEL | $10.35 |
| ROB132 | ROBART 2-3/4INCH SCALE DIAMOND TREAD WHEEL | $10.65 |
| ROB133 | ROBART 3 INCH SCALE DIAMOND TREAD WHEEL | $12.25 |
| ROB134 | ROBART 3-1/4INCH SCALE DIAMOND TREAD WHEEL | $12.85 |
| ROB135 | ROBART 3-1/2INCH SCALE DIAMOND TREAD WHEEL | $13.45 |
| ROB136 | ROBART 3-3/4INCH SCALE DIAMOND TREAD WHEEL | $14.95 |
| ROB137 | ROBART 4 INCH SCALE DIAMOND TREAD WHEEL | $16.75 |
| ROB148 |
ROBART RETRACTABLE MAIN GEAR LARGE SCALE F4U CORSAIR
|
$325.00 |
| ROB154 | ROBART P-51 RETRACTS 85ø NON- ROTATING [DISC WHEN GONE] | $325.00 |
| ROB156VRX |
ROBART MEDIUM DELUXE AIR CONTROL KIT  Same
as the #157VR but includes a #191 Medium Tank, 2 #190 Quick Disconnects
and the #173 On Board Pressure Gauge.
|
$74.95 |
| ROB157VR |
ROBART VARIABLE AIR CONTROL W/O TANK
|
$40.95 |
| ROB157VRX |
ROBART DELUXE VR CONTROL KIT W/LARGE TANK-DISCONNECTS & PRESSURE GAUGE
|
$76.95 |
| ROB160LWC | RETRACT
TAILWHEEL W/AIR CYL
|
$134.95 |
| ROB160WC | ROBART
RETRACTABLE TAIL GEAR
|
$119.95 |
| ROB164G |
ROBART HAND PUMP W/GAUGE
|
$34.95 |
| ROB165 |
ROBART AIR CYLINDER 3/8 INCH BORE- 1 INCH PISTON TRAVEL 
Features: 3/8 inch Bore, 1 inch of piston travel,
turned aircraft-aluminum with threaded no-leak cover, threaded internal
piston rod with 2-56 threads, pinned adjustable attachment bracket, and
delivers 11 pounds of force at 100 psi. |
$23.95 |
| ROB166 |
ROBART AIR CYLINDER 5/8 INCH BORE- 2-1/8 INCH PISTON TRAVEL
|
$29.45 |
| ROB167 | ROBART
AIR-CONTROL VALVE 2 POSITION 5 PORT
|
$18.95 |
| ROB167VR | ROBART
VARIABLE RATE AIR SYST [2W3P] CV
|
$26.95 |
| ROB169 |
ROBART HIGH PRESSURE TUBING [INCLUDES 5 RED AND 5 BLUE]
|
$5.95 |
| ROB172 |
ROBART AIR TANK
|
$8.95 |
| ROB188VR |
ROBART VARI RATE AIR CONTROL
|
$45.95 |
| ROB188VRX |
DELUXE VR AIR CONTROL KIT W/SMALL TANK  Same
as the # 188VR but includes 2 #190 Quick Disconnects and the #173 On
Board Pressure Gauge.
|
$71.95 |
| ROB189 |
ROBART AIR LINE RESTRICTOR-4
|
$7.25 |
| ROB190 |
ROBART AIRLINE QUICK DISCON-2
|
$8.95 |
| ROB191 |
ROBART PRESSURE TANK
|
$11.95 |
| ROB192 |
ROBART LARGE PRESSURE TANK This is the largest air tank available, and a
replacement for plastic soda bottles that are sometimes used. This is the
perfect air tank for giant scale retract systems. Constructed from
aluminum with a steel cap, this air tank is safe for air pressures to 150
psi. Air capacity is 43 cu. in. (704.8cu. cm.) |
$15.95 |
| ROB195G | ROBART
AIR MAINTENANCE KITS
|
$12.95 |
| ROB195L | ROBART
AIR MAINTENANCE KITS
Part # 195L (large kit) has everything to service three 1/2 bore and one 3/8 bore air cylinders, the control valve (std. or VR), fill chuck, fill port and check valve |
$11.95 |
| ROB195S | ROBART
AIR MAINTENANCE KITS
Part # 195S (standard kit) has everything you need to service a tri- gear set having three 3/8 bore air cylinders, a control valve (standard or VR), the fill chuck, fill port and check valve |
$10.95 |
| ROB204 | ROBART
SUPER FUELER
|
$7.95 |
| ROB205 | ROBART
ULTRA FUELER
|
$9.95 |
| ROB215 |
ROBART 1/16 T TUBING COUPLER
|
$3.49 |
| ROB216 |
ROBART 1/16 L TUBING COUPLER |
$3.49 |
| ROB217 |
ROBART 1/16 STRAIGHT TUBING COUPLER [4] |
$3.00 |
| ROB218 | ROBART 3/32 T TUBING COUPLER | $3.49 |
| ROB219 | ROBART 3/32 L TUBING COUPLER | $3.00 |
| ROB220 | ROBART 3/32 INCH STRAIGHT TUBING COUPLER [4] | $3.00 |
| ROB221 | ROBART 1/8 T TUBING COUPLER | $3.49 |
| ROB222 | ROBART 1/8 L TUBING COUPLER | $3.49 |
| ROB223 | ROBART 1/8 INCH STRAIGHT TUBING COUPLER [4] | $3.35 |
| ROB305 | ROBART
HINGE PT. MINI [6]
|
$2.15 |
| ROB306 | ROBART HINGE PT. MINI [15] | $3.80 |
| ROB307 | ROBART
HINGE PT. STEEL PIN (6)
|
$2.75 |
| ROB308 | ROBART HINGE PT. STEEL PIN (15) | $4.95 |
| ROB309 | ROBART
HINGE PT. SUPER [6]
|
$3.30 |
| ROB310 | ROBART HINGE PT. SUPER [15] | $6.15 |
| ROB311 | ROBART
1/8 INCH BIG BAG COMBO PAK-50 HINGE POINTS PER BAG
|
$19.95 |
| ROB311B | ROBART
HINGE PT STEEL PIN 1/8 INCH [100]
|
$26.95 |
| ROB312 | ROBART 3/16 INCH BIG BAG COMB PAK-50 HINGE POINTS PER BAG | $19.95 |
| ROB312B | ROBART HINGE PT STEEL PIN 3/16 INCH [100] | $32.95 |
| ROB315 |
ROBART HINGE PT. POCKET [6] 
|
$3.25 |
| ROB316 | ROBART HINGE PT. POCKETS (15) | $6.15 |
| ROB317 | ROBART
HINGE PT. SUPER POCKET (6)
|
$3.60 |
| ROB318 | ROBART HINGE PT. SUPER POCKET (15) | $6.15 |
| ROB319 | ROBART
HINGE PT. DRILL JIG
Includes 1/8" & 3/16" Drill Bushings |
$5.45 |
| ROB326 | ROBART
5/16 BALL LINK C/L HORN
|
$2.95 |
| ROB327 | ROBART 1/2 BALL LINK C/L HORN | $2.95 |
| ROB328 | ROBART 5/8 BALL LINK C/L HORN | $2.95 |
| ROB329 | ROBART 3/4 BALL LINK C/L HORN | $2.95 |
| ROB330 |
ROBART 1/2INCH SUPER BALL LINK HORN WITH CLEVIS
1/2" Super Ball Link Control Horn |
$5.95 |
| ROB331 | ROBART
3/4INCH SUPER BALL LINK HORN WITH CLEVIS
3/4" Super Ball Link Control Horn |
$5.95 |
| ROB332 | ROBART
1 INCH SUPER BALL LINK HORN WITH CLEVIS
1" Super Ball Link Control Horn |
$5.95 |
| ROB333 | ROBART
1-1/4 SUPER BALL LINK HORN WITH CLEVIS
1 1/4" Super Ball Link Control Horn |
$5.95 |
| ROB401 | ROBART
SUPER STAND
|
$10.40 |
| ROB402 | ROBART
SUPER STAND II
Fully Adjustable Model Stand and Work Station. Fits any size airplane from small gliders to Giant
Warbirds. Fits any size model boat. |
$18.95 |
| ROB404 |
ROBART INCIDENCE METER
|
$38.45 |
| ROB407 |
ROBART SDI GAUGE
|
$8.75 |
| ROB408 |
ROBART SUPER TRANSMITTER TRAY 
|
$24.95 |
| ROB430 |
ROBART ALL IN ONE PROP WRENCH
|
$6.95 |
| ROB459C | ROBART
COARSE DRUM CUTTER
|
$7.95 |
| ROB459F | ROBART FINE DRUM CUTTER | $7.95 |
| ROB460C | ROBART
COARSE CONE CUTTER
|
$7.95 |
| ROB460F | ROBART FINE CONE CUTTER | $7.95 |
| ROB461C | ROBART
3/8 INCH COARSE BALL CUTTER
|
$7.95 |
| ROB461F | ROBART 3/8 INCH FINE BALL CUTTER | $7.95 |
| ROB462C | ROBART
1/4 INCH COARSE BALL CUTTER
|
$7.95 |
| ROB462F | ROBART 1/4 INCH FINE BALL CUTTER | $7.95 |
| ROB463C | ROBART
1/4 INCH COARSE ROD CUTTER
|
$7.95 |
| ROB463F | ROBART 1/4 INCH FINE ROD CUTTER | $7.95 |
| ROB464C | ROBART
1/8 INCH COARSE ROD CUTTER
|
$7.95 |
| ROB464F | ROBART 1/8 INCH FINE ROD CUTTER | $7.95 |
| ROB465C | ROBART
COARSE DISC CUTTER
|
$7.95 |
| ROB465F | ROBART FINE DISC CUTTER | $7.95 |
| ROB466C | ROBART
COARSE CUTTER-ASST [6]
|
$45.70 |
| ROB466F | ROBART
FINE CUTTER ASST [6]
|
$45.70 |
| ROB605 | ROBART PNEUMATIC RETRACT L.G. | $87.95 |
| ROB605HD |
ROBART
PNEUMATIC RETRACT Light, durable and compact, these pneumatic retracts are perfect for 5 to 10 pound aircraft. A durable, glass-filled nylon housing supports an aluminum pivot bearing, which secures the tempered steel 3/16 inch wire strut. Each unit has a positive up-and-down lock and a smooth cam action mechanism. |
$87.95 |
| ROB606HD |
ROBART
85*[60-90] MG 3/16 INCH WIRE STRUT Light, durable and compact, these pneumatic retracts are perfect for 5 to 10 pound aircraft. A durable, glass-filled nylon housing supports an aluminum pivot bearing, which secures the tempered steel 3/16 inch wire strut. Each unit has a positive up-and-down lock and a smooth cam action mechanism. |
$87.95 |
| ROB607 |
ROBART NOSE
GEAR RETRACT Light durable and compact this pneumatic nose gear retract is perfect for up to a 10 pound aircraft. A durable, glass-filled, nylon housing supports an aluminum pivot bearing, which secures the tempered steel 5/32 inch wire strut. Each unit has a positive up-and-down lock and positive tiller arm steering and smooth cam action mechanism. |
$60.45 |
| ROB615 |
ROBART 100* PNEUMATIC ROTATING RETRACTS
|
$169.95 |
| ROB620 |
ROBART MIDWEST AT-6 RETRACTS
|
$269.00 |
| ROB622 |
1/6 SCALE
RETRACT Designed for use in a 1/6th scale P-51 type model aircraft were strut location is close to the leading edge of the wing. Constructed from aircraft grade aluminum and steel componets, these pneumatically operated retracts feature positive up and down locks. Each retract has functional chrome moly steel struts. Designed for use with 4” dia. wheels. Struts are adjustable for height and toe in. |
$269.00 |
| ROB6225 |
1/6 SCALE
RETRACT [P-51] 5in OFFSET STRUT [PR] Designed for use in the 1/5th scale Top Flite Giant P-51 Mustang model. Constructed from aircraft grade aluminum and steel componets, these pneumatically operated retracts feature positive up and down locks. Each retract has functional chrome moly steel struts. Designed for use with 5” dia. wheels. Struts are adjustable for height and toe in. |
$269.00 |
| ROB630BNZ |
ROBART TRIKE LG/TOPFLIGHT BEECHWOOD BONANZA
|
$339.95 |
| ROB650 |
ROBART ROBOSTRUT [STRAIGHT] 5-11/32 INCHES LONG
|
$44.95 |
| ROB652L |
ROBART LEFT OFFSET STRUT FOR 2-1/2/2-3/4 WHEEL
|
$47.95 |
| ROB652R |
ROBART RIGHT OFFSET STRUT FOR 2-1/2/2-3/4 WHEEL |
$47.95 |
| ROB653L |
ROBART LEFT OFFSET ROBOSTRUT
|
$47.95 |
| ROB653R |
ROBART RIGHT OFFSET ROBOSTRUT |
$47.95 |
| ROB656 |
ROBART STRAIGHT STRUT W/FORK 2-3/24 INCH WHEEL
|
$47.95 |
| ROB662L | ROBART
LEFT OFFSETS 1/4 - 3-1/2 WH
|
$54.50 |
| ROB662R | ROBART RIGHT OFFSETS 3-1/4 TO 3-1/2 WHEEL 9 INCHES LONG | $54.50 |
| ROB689 |
ROBART 1/5 SCALE CUB LG
{NOTE: This gear will not
fit the (Wheels Not Included) |
$129.95 |
| ROB690 |
ROBART 1/4 SCALE CUB LG For the Hangar 9 & Sig (Wheels Not Included) |
$139.95 |
This
retractable tailwheel is the only small unit available for scale tailwheel
retraction for a 5 to 10 lb. airplane. It features spring centering and a
steering mechanism. This unit operates from a conventional servo or a air
cylinder, and has a self locking down.
This
retractable tailwheel is the only small unit available for scale tailwheel
retraction for a 2 to 5 lb. airplane. This unit operates from a
conventional or mini servo and has a self locking down.
These
pneumatically operated retracts are constructed from aircraft steel and
aluminum componets. They feature positive up-locks, functional steel oleo
struts, and 1/4” axles. These retracts were designed to fit the Top
Flite Giant Scale Corsair or others models of similar scale
This
is a complete air-control kit for use with any pneumatic-operated (air)
retracts. The kit includes: air line, retaining nuts, fittings, variable
rate control valve, fill port, check valve, and fill fitting.
Same
as the # 157VR but includes a #192 Large Tank, 2 #190 Quick Disconnects
and the #173 On Board Pressure Gauge.
These
pneumatic retractable tailwheels are built the same as our large scale
mechanical tailwheels, except they include an air cylinder mounted right
to the frame of the tailwheel. All you need to do is run the airline to
the tailwheel, mount your wheel, and you’re ready to go. Designed for
large and giant scale model airplanes weighing up to 40 lbs.
These
pneumatic retractable tailwheels are built the same as our large scale
mechanical tailwheels, except they include an air cylinder mounted right
to the frame of the tailwheel. All you need to do is run the airline to
the tailwheel, mount your wheel, and you’re ready to go. Designed for
large and giant scale model airplanes weighing up to 40 lbs.
This
handy air pump for charging and recharging pneumatic (air) retract
systems is rated at over 100 psi. The pump is durable and easy to store
in your flight box. The pump includes a pressure gauge for reading input
pressure and compatible with all air system fill-chucks.
Features:
5/8 inch Bore, 2 1/8 inches of piston travel, turned aircraft-aluminum
with threaded no-leak front cover, threaded rod end for positive clevis
attachment, a pinned adjustable attachment bracket, and delivers 30
pounds of force at 100 psi.
This
valve is for use with all pneumatic-operated (air) retractable landing
gear, and it controls air flow to retract or extend air cylinders. It
can be used to operate tricycle landing-gear systems. A double O-ring
seals in a burnished i.d. for no-leak operation and lifetime
lubrication.
This
valve if for use with all pneumatic- operated (air) retractable landing
gears. Independent adjustments for up and down, true scale like speed.
Precise control, works with all makes of retracts. Gear always moves
under full pressure and volume. Works with 2 or 3 landing gear systems.
The operating valve requires approximate 1/4" of push rod travel
and functions with standard or mini servos.
This
is durable, high-pressure tubing for use with pneumatic-control systems
and retracts. Rated at 150psi, the tubing has a 1/8-inch OD with a
1/16-inch i.d., and it works with all pneumatic systems. The package
includes 5 feet each of red and blue tubing.
This
is a compact air tank for use with all pneumatic retracts. Air Capacity:
14.5 cu. in. (237.6 cu. mm.) Constructed of aluminum, with a sealed steel
cap, this tank is safe for pressures to 150 psi.
This
is a complete air-control kit for use with any pneumatic-operated (air)
retracts. The kit includes: air tank, air line, fittings, retaining
nuts, variable rate control valve, fill port, check valve, and fill
fitting.
These
solid-brass air restrictors reduce the cycle speed of pneumatic retracts
and are designed for use with 1/16-inch id air lines. Barbed ends for
secure connections
This
light-weight, easy-to-use air-line connector for pneumatic systems
allows quick and easy assembly and disassembly of the air line. The unit
is rated at over 100 psi. It will not twist or kink the air line and is
compatible with all pneumatic systems.
Robart
and reliability go hand in hand, and we want your air system to continue
to be reliable for many years. So just like any piece of equipment that
has moving parts, your air system needs periodic maintenance to keep it
functioning properly. Most of our flying sites do not have the luxury of
paved ramps, taxiways, and even runways. That means your airplane is
operating in a dirty environment, and dirt, sand and even moisture cause
wear and ultimately failure. To keep your robart system reliable and
operating at peak efficiency we recommend periodic maintenance and these
service kits provide everything you need, even the grease 
This
Fueler is ideal for tightly cowled engines where access is difficult. It
automatically connects your fuel source to the fuel tank for refueling,
then it reconnects the tank to the engine crankcase, all without
disturbing the fuel lines. Safe for use with glow, gas and smoke fluids.
This
four-valve fuel switch has replacable o-rings and fills the same as the
Super Fueler, but for use with pressurized tank systems. It's for sport,
pattern, and pylon. Safe for use with glow, gas, and smoke fluids.
Made
from high-density plastic resins, Robart Tubing Couplers are safe to use
with air, glow- and gas-fuel systems. The couplers come four pieces per
package of either Tees, Elbows, or straight couplers. The couplers are
color-coded red and black.
Are
truly unique. Instead of trying to chisel a slot, as with ordinary
hinges, simply drill a hole, add some glue and insert the hinge point.
Simple, perfectly straight hinging can be done quickly. The hinges are
available in three sizes 3/32", 1/8" & 3/16".
Guides
and drills mounting holes for hinge points. Adjustable for all control
surfaces, it's made of hardened steel and incorporates removable drill
bushings for use with 1/8 and 3/16 inch diameter drills.
For
your Radio Control Airplane it can incorporate a ball link in the horn
that, when attached, eliminates bending of pushrods and clevises. For
use with standard metal clevises, the horns have a scale appearance and
nylon construction. The horns are available in four sizes.
Incorporates
a pivoting aluminum ball link in the horn to eliminate bending pushrods
while minimizing slop. Made of nylon construction, the horns come in
four sizes and come with steel clevis for 2-56 & 4-40 threaded rods,
and are perfect for large model aircraft.
The Super Stand
has built-in tray areas and is great for field maintenance, as a
point-to-point carrier and as a building and painting tool. Perfect for
use when using the Robart Model Incidence Meter
This
incidence meter is a must for setting proper thrust and wing/stabilizer
incidences on a new model, or on one that shows some mysterious
misalignment. It features an improved steel counterweight, precision
pointer and anti-parallax scale, new magnified meter face and bubble
level. Supplied with 18 inch meter bar. 36 inch meter bar available
direct.
This
device measures the amount of up/down or left/right on your model
aircraft elevator, ailerons, flaps and rudder. The indicator features
precise measurement of surface deflection inches and is suitable for
large and small aircraft.
The
"ALL-IN-ONE PROP WRENCH has both inch and metric sizes replacing
twelve standard wrenches. The ALL-IN-ONE design helps to end flight box
clutter, its large size is easy to see and hard to loose, the thin
profile works on all types of prop nuts, use two for jam nut
applications, and its extra long for extra torque. The ALL-IN-ONE PROP
WRENCH is heat treated tough and plated for long life.
These
cutters are made of virtually indestructible carbide on 1/8-inch steel
shanks. There are seven functional shapes that won't wear out, load up,
break down, or overheat. The cutters are for use in shaping all woods,
plastic, fiberglass and ceramics. Fine or Coarse grits. Not recommended
for use on metal. (ROB459 does not include mandrel) ROB466 Complete set
of 6 Cutters (drum not included). Coarse or Fine grit
Designed
for .60 size aircraft that weigh up to 10 pounds, these rotating retracts
lend realism to any scale model. Constructed from aircraft steel and
tough, glass-filled nylon, they can handle grass or paved flying fields.
These units are pneumatically operated. Perfect for Top Flite F4-U
Corsair, and P-40 Warhawk.
Designed
for use in the Midwest Products 1/6th scale AT-6, these units adapt
easily to other 1/6th scale AT-6 models. Constructed from aircraft grade
aluminum and steel componets, these pneumatically operated retracts
feature positive up and down locks. Each retract has functional chrome
moly steel struts. Designed for use with 4” dia. wheels. Struts are
adjustable for height and toe in.
These
series of pneumatic retracts are designed for R/C aircraft weighing up to
24lbs.. Constructed with heat treated aluminum alloy frames and trunions,
these gear are furnished with 1/2” dia. 4130 alloy steel tubular
RoboStruts. They offer long dependable service for large aircraft flying
off grass or paved runways. Powered by a 1/2” bore triple sealed Robart
air cylinder, all of these units feature positive up and down locks.
Easily adjusted for toe-in with the unique Robart “split-lock” trunion.
Available in standard 90°, 85° Main Gear, and 90°, 100°, 105°, and
110° Nose Gear retract angles, with straight or offset struts. The Nose
Gear units are standard as a steerable with an offset strut. These gear
are also available without a strut, for use with any 7/16” or 1/2” dia.
RoboStrut.
Robart
3/8" (9.5mm) diameter are the best replacements for wire landing
gear. They are suitable for most airplanes weighing 4 to 10 pounds. With
real functional oleos and torque links, they can be used on grass or paved
airfields. No more bent wires! The 380 RoboStruts are available in
straight, right or left offsets (up to a 3 1/4 inch {82.6mm} dia. wheel),
and a fork style oleo. All come with easy to use 5/32 inch (4mm) and 3/16
inch (4.8mm) dia. wire adapter bushing.
Designed
for airplanes weighing 10 to 18 lbs., and for use on grass or paved
airfields, 440 Series RoboStruts are the perfect replacement for weaker
wire, stainless steel, and aluminum type struts, 440 RoboStruts are 7/16
inch (11.1mm) dia. Made from real aircraft grade materials, welded and
heat treated components, these struts come with easy to use 3/16 inch
(4.8mm) dia. wire adapter, also a split sleve adapter to fit all popular
1/2 inch (12.7mm) socket type retract units. Available in straight, right
and left offsets (up to a 4 inch {101.6mm} dia. wheel), and a fork style
oleo.
For
the Great Planes 80"